My Little Black Book

 
Home arrow Green Building arrow Removing mould and algae
Removing mould and algae PDF Print E-mail
Friday, 07 January 2011

Damp areas on walls, especially where there is little sunlight. encourages the growth of mould and algae. To remove and help retard the growth of moss and algae, you will need the following materials.

A paint scraper;

A stiff brush;

Fungicidal solution for the exterior;

An inexpensive paintbrush;

Safety glasses;

Face mask;

Gloves.

Please note:  It is very important to wear safety goggles and a face mask.

Start by removing larger clumps of moss and algae by using a paint stripping knife, then use a stiff brush to remove any remaining growth.

Dilute the fungicide according to the instructions and paint it onto the wall.  Don't be stingy with the amount - coat it iberally. 

Allow several days for the fungicide to kill off the algae, lichen or moss.  It will darken as it dies off.

Brush away the darkened material and recoat the wall with the fungicide.

CDROM YAMAHA KHS 5238E 52X Sound Card Onboard Video Card MSI G4TI4600 LAN Card Intel SB82558B RAID Onboard Test Item PassFail System Comparability Test Windows XP Setup Installation Test Pass Supports Driver Acer Aspire 2930Z Wireless LAN Driver 12.0.0.73 Installation Test Pass Standby Mode Test Pass Shut Down Test Pass Restart Test Pass.

It takes roughly three minutes to output a printed CD or DVD, depending on the complexity of your design.

 


Facebook!
 
< Prev   Next >

Suppliers

Advertising
SIPS Kit Houses
L A Design Studio

Copyright © 2018 All About Building
Website copyright (C) 2005-2008 SnapSites - http://www.snapsites.net All rights reserved.